FiberCut Copy

Andrew Bish

Founder & CEO

Andrew Bish is the COO of Bish Enterprises and founder of Hemp Harvest Works. After exiting the retail management industry after 14 years, he rejoined the family business in 2012 and transitioned into the agriculture industry. Since 2015, he has been focusing on identifying and resolving the many issues currently facing hemp harvesting and processing. His goal is to provide equipment that helps standardize hemp farming practices, while allowing growers to increase their scale of operation and decrease costs.

What is a FiberCut?

The FiberCut is a multi-height, pull-behind sickle mower that’s hydraulically driven and developed exclusively towards hemp fiber. This unit’s modular design is built to allow an operator to add, remove, and adjust the cutting arms of the machine. Because the FiberCut can operate at high speeds up to 12 mph, its efficiency is significantly higher compared to conventional and expensive forage harvesters and disc mines. With particular field circumstances, producers are able to perform at their peak. Components, parts, and supplies for this unit are carried by Bish Enterprises and at your local dealership located within the United States. All hemp harvesting equipment developed by Bish Enterprises can be viewed here.

Pull Behind Multi-Height Sickle Mower for Hemp Fiber

Cut hemp stalks into 24"-39" sections for easy​…

Extras

Specs

   Overall Width: 8’ 5”

Overall Height: 11’-3 3/8”
Distance of knife edge to ground: 3”

Overall Weight: 11150 lbs.

Overall Length: 27’ 8”

Distance range between knife edges: 27”-36”

Horizontal (Fore Aft Range): 0”-15”

Overall Cut Length (12’ model): 12’-2 3/4”

Tire Size: 16.5L-16.1SL

Hydraulic fluid capacity: 60 gallons

Sickle guard size: 2-3/4”

Sickle section size: 3”

Overall Weight: 11150 lbs.

Overall Length: 27’ 8”

Distance range between knife edges: 27”-36”

Horizontal (Fore Aft Range): 0”-15”

Overall Cut Length (12’ model): 12’-2 3/4”

Tire Size: 16.5L-16.1SL

Hydraulic fluid capacity: 60 gallons

Sickle guard size: 2-3/4”

Sickle section size: 3”

Overall Width: 20’-7 3/4”
Overall Height: 12’-7 7/8”
Distance of knife edge to ground: 16-1/4”
Horsepower Requirements

4 bar cutters need 140+ hp tractors
3 bar cutters need 120+ hp tractors
2 bar cutters need 100+ hp tractors
1 bar cutter needs 80+ hp tractor
Exception: 1 bar with 6ft need 45+ hp tractors.

PTO Requirements

1000 RPM 21 Spline

Hydraulic Requirements

2-3 bars needs 3 hydraulic banks 1 bar needs 1 hydraulic bank

Electricity

12 vdc

Horsepower Requirements
  • 4 bar cutters need 140+ hp tractors
  • 3 bar cutters need 120+ hp tractors
  • 2 bar cutters need 100+ hp tractors
  • 1 bar cutter needs 80+ hp tractor
Exception: 1 bar with 6ft need 45+ hp tractors.
PTO Requirements
1000 RPM 21 Spline
Hydraulic Requirements
2-3 bars needs 3 hydraulic banks 1 bar needs 1 hydraulic bank
Electricity
12 vdc

Versatility

Unit works on a wide range of tractors and 3-point mount categories. The FiberCut is compatible with category 3 and 4. Both hitches (standard and quick-hitch setups) in its standard configuration, while an optional cat 5-point hitch is available for those that require it. The FiberCut requires less horsepower than competing machines, allowing for a wider range of tractor options available to the operator. We achieve this by powering the unit hydraulically vs mechanically. The lower horsepower requirements reduce operating costs for less fuel consumption and input costs. Unit is built on a modular platform. The FiberCut allows an operator to add remove and adjust the cutting arms of the machine to allow producers to achieve maximum performance with their specific field conditions.

Easy to Find Parts

Bish Enterprises uses quality components and carries all of the needed parts and supplies for the FiberCut, but was designed with both the customers and existing dealers in mind, and most of the components that are used are already available at local dealerships across the United States. Bish Enterprises can overnight parts to most places in the continental US in addition to obtaining them from your local implement dealer.

We Stand Behind Our Products

Bish Enterprises offers its industry leading warranty on every NEW FiberCut sold. Bish Enterprises will provide a parts and labor warranty for the components against all manufacturer defects for a term of 12 months.

Related Posts